Swedish researchers outline how the mercury emissions from industry can be greatly reduced by targeting sulphuric acid

Sulphuric acid is the world’s most used chemical. It is an important reagent used in many industries and it is used in the manufacture of everything from paper, pharmaceuticals and cosmetics to batteries, detergents and fertilisers.

It is therefore a worldwide challenge that sulphuric acid often contains one of the most toxic substances – mercury.

Researchers at Chalmers University of Technology, Sweden, have now developed a method that can reduce the levels of mercury in sulphuric acid by more than 90% – even from low levels.

Research leader Björn Wickman, associate professor at the Department of Physics at Chalmers said: “Until now, there has been no viable method for purifying finished sulphuric acid at all.

“With such a radical reduction in the mercury content, we come well below the current limit values.

“Such pure high-quality sulphuric acid is in high demand in industrial applications and an important step in reducing environmental impact.”

Sulphuric acid is produced either from sulphur from the petroleum industry or as a by-product in the mining industry’s smelters.

In the latter case, mercury, which is naturally present in the ore, can end up in the finished products. The recycled streams in the smelters can also contain mercury.



Toxic emissions


Mercury dispersal is a worldwide problem, as the substance is volatile and can be dispersed by air over large areas.

This toxic heavy metal is then washed into streams and lakes when it rains.

It is stored in the soil, water and living organisms, impacting the entire food chain, and it can damage the brains and central nervous systems of humans and animals.

According to a report from the United Nations Environment Programme (UNEP), emissions of mercury to the atmosphere increased by an estimated 20% from 2010 to 2015.

In 2015, about 2,200 tonnes of mercury were emitted into the air as a result of human activities such as cement manufacture, small-scale gold mining, coal burning, metal production and other manufacturing industries.

In addition, an estimated 1,800 tonnes of mercury ended up in the soil and water in that same year.

According to the report, mercury concentrations in the atmosphere may have increased by 450% in the last century.

Wickman said: “Any and all ways we can reduce mercury emissions are good, because any mercury that is emitted accumulates in the environment and continues to pose a health threat for thousands of years.”


Capturing through electrochemistry


Five years ago, Wickman’s research team at Chalmers presented a pioneering method for removing mercury from water using electrochemical processes.

The method is based on a metal electrode taking up the toxic metal and forming an alloy. The mercury can then be safely removed, and the electrode reused.

Now the researchers have taken this technology one step further, and in a new study they have shown how mercury can be removed from concentrated sulphuric acid.

The experiments with sulphuric acid were done in collaboration with mining and metals refining company Boliden and the company Atium, a spin-off from the Chalmers School of Entrepreneurship, with the aim of bringing the removal of mercury from water and chemicals to market.

The researchers now hope to be able to move forward with their partners and develop a type of reactor through which sulphuric acid can flow and be purified at the same time.


Potential to reduce costs and environmental impact


Today, mercury is mostly removed at an earlier stage – from the concentrates and recycled streams at the smelter before sulphuric acid is produced.

This is an established process, but leaves trace amounts of mercury into final products.

Vera Roth, doctoral student at Chalmers and first author of the recently published, said: “Purifying the sulphuric acid as well prevents additional mercury emissions, while allowing industry to operate more cost-effectively and produce a high-purity, non-toxic product.

“The next step will be to scale up the method into a pilot process that is closer to real-world volumes of thousands of tonnes,”

According to the Statista database, the worldwide market volume for sulphuric acid amounts to around 260 million tonnes per year. By 2029, this figure is expected to rise to 314 million tonnes.

The lower the mercury content of the sulphuric acid, the more valuable it is.

Sulphuric acid for commercial purposes is considered to be of acceptable quality when its mercury content is below 0.30 milligrams per kilogram.

If the content is below 0.08 milligrams per kilogram, the sulphuric acid is considered to have a high purity.

With the new method, the researchers have reduced the level of mercury to 0.02 milligrams per kilogram of sulphuric acid in their pilot study.

Wickman said: “The limit values for how much mercury sulphuric acid may contain are based on the technology available today.

“With the new method for purifying sulphuric acid, our hope is that the legislation around the limit values will be tightened in a global perspective where mercury levels are generally much higher.”

Image 1: Sulphuric acid is an important industrial chemical, but it often contains one of the world’s most toxic substances: the volatile heavy metal mercury, which can pollute both the air and water. Researchers at Chalmers University of Technology have shown that it is possible to reduce the levels of mercury in sulphuric acid by more than 90 per cent – even from low levels. The study was conducted in collaboration with the spin-off company Atium and mining and metals refining company Boliden. Credit: Boliden.

Image 2: The volatile heavy metal mercury is dispersed through the air and accumulates in watercourses, where it reaches both humans and animals. Credit: Photo: Nazrin Babashova/ Unsplash. Public domain.

Research Aether / Earth Uncovered